隔离墩模具特点介绍-隔离墩模具方案 隔离墩模具介绍是在长期生产此类模具的基础之上，按照50、100、200厘米长度的生产标准，将以便捷性为出发点，基本上每套模具都会有翻转结构，这样在脱模的时候比较省事一些。隔离墩模板介绍主要是针对其模板加工、使用等环节而言，来进行生产加工的时候，为了使得该模具整体的成型效果会比较好，我们大多会选择使用电焊机等机器设备来对模具整体来进行加工工作，这样可以比较好的保证模具之间的连接紧密，不存在缝隙等问题。为了使隔离墩模具在工程中容易进行使用，我们在其表面焊接上了翻转轴，这样无论是模具的脱模工作，还是其在工程中来进行搬运的时候，都会更加的方便。模具一般根据客户提供的设计图纸来进行生产，所以生产出来的隔离墩模具整体符合工程的要求，生产出来的产品其规格是符合工程需要的。在对模具进行加工的时候，为了方便安装，我们选择了整体焊接的方式来对钢板进行固定，这样模具整体的固定效果就会比较好，也不会出现混凝土浆料泄露的情况，能够在工程中长期来进行使用。 ntroduction to the characteristics of isolation pier mold - isolation pier mold scheme the introduction of isolation pier mold is based on the long-term production of such molds. According to the production standards of 50, 100 and 200 cm length, it will take convenience as the starting point. Basically, each set of molds will have a turnover structure, so it will be easier to take off the mold. The introduction of isolation Pier Formwork is mainly for the processing and use of formwork. In order to make the overall forming effect of the mold better, we mostly choose to use electric welding machines and other machinery and equipment to process the mold as a whole, so as to better ensure the tight connection between molds, There are no gaps and other problems. In order to make the mold of the isolation pier easy to use in the project, we welded a turnover shaft on its surface, so that it will be more convenient for both the demoulding of the mold and its handling in the project. Molds are generally produced according to the design drawings provided by customers, so the isolation pier molds produced meet the requirements of the project as a whole, and the specifications of the products produced meet the needs of the project. When processing the mold, in order to facilitate installation, we chose the overall welding method to fix the steel plate, so that the overall fixing effect of the mold will be better, there will be no leakage of concrete slurry, and it can be used in the project for a long time. Introduction to the characteristics of isolation pier die - isolation pier die scheme